If your Bissell ProHeat 2X Revolution Pet Turbo isn’t sucking up water or dirt as it should, it’s likely due to a clog, a filter issue, or a blockage. This guide provides practical, step-by-step instructions to diagnose and fix common suction problems, helping you restore optimal performance safely.
Key Takeaways
| Check for clogs | Clogs in hoses or filters can block suction. |
| Inspect filters | Dirty or clogged filters reduce suction power. |
| Examine the brush roll | Debris tangled in the brush can impede airflow. |
| Ensure proper water and solution levels | Low water or solution can affect suction. |
| Test the motor and seals | A faulty motor or worn seals can cause suction loss. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Step 1: Turn Off and Unplug
Before inspecting your cleaner, ensure it is turned off and unplugged from the power outlet to prevent any electrical hazards.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Step 2: Check and Clear Clogs
- Remove the water tank, brush roll, and hose according to your model’s instructions.
- Inspect the hose and nozzle for blockages or debris.
- Clear any obstructions using a long, flexible brush or pipe cleaner.
Step 3: Clean or Replace Filters
- Remove the filters and rinse them thoroughly with water.
- Allow filters to dry completely before reinstalling.
- If filters are damaged or excessively dirty, replace them with compatible replacements.
Step 4: Check the Brush Roll and Belt
Remove the brush roll and clear any tangled hair, thread, or debris. Ensure the belt is intact and properly aligned.
Step 5: Test the Motor and Seals
Inspect seals around the motor and water pathways for cracks or wear. If you suspect a motor issue, consult a professional repair service.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 19.5 lbs
- ✔ Cord Length: 25 ft
- ✔ Capacity: 1.25 liters
JORAIR Brush Replacement Compatible
- ✔ Weight: Approx. 0.5 lbs
- ✔ Color: White and black
- ✔ Included: 3 brushes and filters
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers 40% more suction power with TurboStrength™ Motor Technology, making it effective at deep cleaning. Its MAX Clean Mode tackles embedded dirt, while Heatwave Technology maintains water temperature for consistent results. Regular maintenance can prevent suction issues and keep it performing at its best.
Pros:
- High suction power
- Quiet operation
- Effective deep cleaning
- Pet-friendly features
Cons:
- Can be heavy
- Requires regular filter cleaning
- More expensive than basic models
Best for: Deep cleaning pet messes and embedded dirt
Not ideal for: Light surface cleaning or small areas
Bottom line: A powerful, pet-friendly carpet cleaner with advanced features for deep cleaning.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Compatible ensures your brush roll stays effective, preventing clogs and maintaining suction. It’s compatible with various Bissell CrossWave models and easy to install.
Pros:
- Easy to install
- Compatible with multiple models
- Keeps cleaning performance high
- Affordable replacement
Cons:
- Only compatible with CrossWave series
- Requires periodic replacement
- May need additional filters
Best for: Maintaining effective brush action during deep cleans
Not ideal for: Use as a primary cleaning tool for carpets
Bottom line: A cost-effective way to keep your crosswave’s brush roll in top shape.
Frequently Asked Questions
Why does my Bissell carpet cleaner have no suction?
Common causes include clogged hoses, dirty filters, tangled brush rolls, or worn seals. Regular maintenance and cleaning of these parts help restore suction.
How often should I clean the filters?
Filters should be rinsed after every few uses and replaced if they show signs of damage or heavy wear. Clean filters ensure optimal suction and cleaning performance.
Can I use other cleaning solutions in my Bissell cleaner?
It’s best to use solutions recommended by Bissell, such as the BISSELL Multi-Surface Solution, to prevent damage and ensure effective cleaning.
How do I prevent future suction problems?
Regularly check and clean filters, clear clogs from hoses and nozzles, and inspect the brush roll for debris. Proper storage also helps prevent damage.
Keeping Your Bissell Running Smoothly
Regular maintenance and timely troubleshooting are key to ensuring your Bissell carpet cleaner maintains strong suction and delivers professional cleaning results. Follow these steps to address common issues and keep your cleaning machine in top condition for years to come.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
